How to Peel a Bright Bar for iPhone 6S and 6S Plus

There’s a lot of debate as to how bright a bar is, and it’s a complex topic to understand, so here’s a quick tutorial on how to peel a bright bar from an iPhone.

First, we’ll need a piece of glass.

There are a lot more options available, so we’ll pick an iPhone 6 Plus for this guide.

If you’re using a larger iPhone, like an iPhone 7 Plus, then we’ll use the larger one.

Once you have a piece like this, simply cut it off with a sharp knife.

You can then apply a little pressure to the edges of the piece to help it pop off.

The trick is to make sure you use a sharp piece of paper to apply the pressure.

We don’t recommend doing this unless you’re sure that the bar will stick to the phone and that it won’t get in the way.

Once the bar pops off, use a pair of scissors to remove the plastic backing.

Once that’s done, you’ll have a bright, vibrant bar.

There’s nothing fancy about the process, but the result is worth it if you’re in a rush and want to be sure that your iPhone doesn’t get caught in the charging port.

Follow these steps to peel off a bright LED bar from your iPhone 6s and 6s Plus.

First off, you will need a bright piece of plastic to apply pressure to.

(For more on Bright Bars, see our guide on Bright Bar Tips.)

Step 1: Apply pressure to both sides of the bright bar.

To apply pressure on both sides, press down on one side of the bar until you hear the bar pop off like a balloon.

Step 2: Now that the plastic is out, it’s time to peel it off.

This time, use the back of a razor blade to peel away the plastic.

This will be a little trickier to do than it was on the first attempt, but you’ll get used to it after a while.

If you have some plastic debris around the edges, you can just dab a small amount of water on them.

The water should leave behind some sort of residue.

(Don’t use too much water, because it could cause your device to burn.)

After you’ve peeled the plastic, you’re done.

It looks like a light, but it doesn’t have much of a bright color to it.

After you’ve removed the plastic from the phone, you should be left with a bright-looking bar.

(The brightness of the iPhone 6 and 6 Plus depends on how bright the LED bar is.)