How to make your own high-brightness trucking LED lights

By Steve NissenbaumThe bright bar truck light is an easy project to pull off.

A single 1.6W bulb works well, but it can easily be upgraded with a few additional LEDs to get a few more hours of light.

To achieve this, you’ll need to buy an additional 5W of LED power.

This is the source of this article.

The light comes in two varieties: bright bar light and bright bare copper.

Bright bar light is bright enough to be used in a dark room, but the brightness isn’t quite as bright as the bar light.

Bright bare copper, on the other hand, can be used as a low-power low-light fixture.

The result is a very bright bar-lit truck.

There are several different ways to make a bright bar lamp.

You can buy a single high-intensity LED, which is more than enough to produce a bright light.

You’ll need an additional 2W of power for the bulb to run at full brightness.

You could also build a simple single LED bulb with one LED and a few other components.

You won’t be able to use the dimmer switch on the bulb, which can be expensive and time-consuming to make.

Instead, you could use a combination of high-output LEDs and single LED bulbs.

If you have a couple of other LED lights that you want to use as a source of power, you can use those too.

You might even want to build a dimmer light in the bulb as well.

You should also consider getting a source for your power, like a dimmable switch, a battery pack, and a switch for your truck’s headlights.

If you have no other source of light, it’s time to get your truck out on the open road.

The bright bar lighting is a good option, but you’ll want to think carefully about which truck lighting to get.

If there’s a truck with a high-efficiency light, you might be able get away with using one.

If your truck is equipped with low-output LED lights, you may want to buy the single-LED version instead.