The brightness bar, a little-known and hard-to-find feature in Windows, is now visible on Windows 8, but only in the lower-right corner.
The bar, which shows the amount of red and green displayed on the display, will be replaced by a blue one, which appears on the bottom left side of the screen.
In the past, users have been able to toggle the brightness on and off using the power button, but it’s not always easy to do.
The new power button has been removed from Windows 8.1 and has been replaced by the Start button.
Here’s how to turn it on and turn it off: Press and hold the Windows 8 Start button to start up the operating system.
Press and release the power key to bring up the Windows keypad.
Type power into the Windows keyboard.
The Windows key pad should read power, power, and power.
The power button should also say “Power off.”
To turn the brightness back on, press and hold down the power and volume buttons.
You’ll see the power bar appear on the top right side of Windows 8 8.
Note: It’s important to hold the power, volume, and volume keys for a few seconds.
If you’re unable to get it to work, try rebooting.
To turn it back on: Press the Windows Start button again.
You can see the light on the Windows display rise.
Press the power or volume buttons to bring it back down to the normal brightness level.
If that doesn’t work, you can try reboots.
To reset the brightness settings, simply press the power on or volume up button on the Start screen.
To toggle between the brightness control on the left and the brightness setting on the right, hold the volume down button and release it.
The Start screen will appear.
To go back to the brightness level that you used, press the volume up or power buttons again.
The brightness slider should now be in the correct spot.
You may have to re-enter the settings, as the brightness slider will change again.
To make sure the brightness will be at its maximum, press both the power power and the volume buttons and then release them simultaneously.
If the brightness is set to its lowest setting, the brightness should remain at its default setting.